What is DTF?
Delivery Times and Shipping
How do I apply DTF?
DTF Application and Ironing Guide
| Material | Temperature (°C) | Time (seconds) | Pressure | Additional Recommendations |
|---|---|---|---|---|
| Cotton | 150 | 12-15 | Medium | Use parchment paper for even heat distribution. |
| Polyester | 135 | 12-15 | Medium | Use parchment paper for even heat distribution. |
| Blends | Variable | Variable | Variable | Adjust temperature and time according to fabric composition. |
| Leather | 160-180 | 15-20 | High | Avoid extremely high pressures to prevent leather damage. |
| Lycra/Spandex | 135-150 | 12-15 | Medium | Ensure the garment is stretched to avoid wrinkles. |
| Nylon | 140-150 | 10-12 | Medium | Use Teflon paper to protect the heat press. |
| Denim | 150-160 | 15-20 | High | Ensure the fabric is completely flat during pressing. |
General Application Steps
-
Garment Preparation: Ensure the garment is clean and wrinkle-free. For fabrics like Lycra/Spandex, it is important that the garment is stretched before ironing the design.
-
Heat Press Setup: Adjust your heat press according to the parameter table mentioned above, considering the recommended temperature, time, and pressure for the specific material of your garment.
-
DTF Design Placement: Position the DTF film on the garment with the design facing down. Consider using parchment or Teflon paper between the press and the film to protect both the press and the design.
-
Pressing: Apply the heat press with the appropriate pressure for the specified time. Pressure and time vary depending on the material, so be sure to follow the recommendations for each type of fabric.
-
Peeling: You can remove the transfer hot or cold, as you prefer 😁
Post-Application Care
- Washing: Wash garments inside out with cold water. Avoid using bleach and prefer air drying or a gentle cycle in the dryer.
- Storage of Unused DTF: Store any unused DTF transfers in a cool, dry place, away from direct sunlight.
Important Considerations
- Perform tests on a small area or a fabric swatch if it is your first time working with a specific material, to ensure that your heat press settings are appropriate.
- Adjust the temperature and time according to the specific composition of the fabric, especially for blends, to achieve the best results.